1 UZeed Bundy R & M time.....well pull the finger out more like it

[Bundy]

Well I thought I might put a thread up to show what I have done since I purchased the Bundy.

I purchased it from NSW
Heres what it looked like when I got it


It came with the following

80s springs for extra lift, 2''Body Lift, 35s BFG Muds, Front and Rear ARB Air Lockers, Sliders, Custom rear bar, bbar and PTO Winch, 240v inverter, Cibie Spots, Cargo barrier, SAAS Style seats, UHF and AM CB, Disc brake conversion on rear, Snorkel and I think that pretty much summs it up apart from the spare motor and various other parts inc wheel spacers alternators and the like.

Since then I have added a number of accessories and mods.

The wrx top mount intercooler:



The dual Battery System:

Will add pick later. Had my girl friends old man help me out with that had to mod wheel arch with hammer just a little. ;D

The Claws for play sold the BFs and have some cheap hancooks for my daily driver...Cant afford to run 35s all the time but I am going to put either 32s or 33 next time around looks pretty stupid with the 31s:



31s flexing at 2Brutals opening



The 35 Bias CLAWS

And I have just recently purchased a set of 170 Lightforce from 2Brutal what a top light for the size. Makes my other lights look crap so Im going to do the head light up grade soon.

Mods to come:

Air tank (bigger one) similar setup to Mad macs)
Alternator beef up
Tuned (Goes in on Monday)

[Twisty]

Bout time you started a buildup thread Andrew.....am looking forward to doing some tracks at LCMP with you on the forum meetup....it'll be good to see how the bundy goes!!!

[Bundy]

I actually used the lockers on the weekend for the first time in i dont know how many months. I was doing a flex pose on the front drain and had the diagonal spin :.

I am really looking forward to coming out to you will leave me for dead in the zook but I will give most things a go. I just need to work out how to get the claws out there. So far none of my mates are definates. My old man may even come out with his 90s prado.

[Twisty]

[quote author=BundyMonkey link=board=18;threadid=11927;start=0#msg208952 date=1126152074]
I actually used the lockers on the weekend for the first time in i dont know how many months. I was doing a flex pose on the front drain and had the diagonal spin :.

I am really looking forward to coming out to you will leave me for dead in the zook but I will give most things a go. I just need to work out how to get the claws out there. So far none of my mates are definates. My old man may even come out with his 90s prado.
[/quote]


I'm not sure if I'm trailering the zook out yet, or driving it, but if I'm trailering it, you welcome to chuck the claws on the car trailer.....the zook doens't take up much room, so there will be heaps of room for some 35's.

Hey, pretty sure i saw ur bundy this arvo near mooloolabah turn off on the motor way, looks pretty funy with those small tyres with all that lift!

[Bundy]

Yeah I know thats why I would like to run 32s or 33s next time but they were cheap and I really couldnt afford at the time anything bigger

[2 BRUTAL]

looks good Andrew, it should have a bit of stick now or not.

[Bundy]

Not really 10% of f*@k all is still nothing but it does go a bit better. Hopefully when its tuned it should push out a few more horses. But I am happy with it you can sit on the speed limit ok it just dies a little on the hills as Dave know from on the way down to Tuff truck I sure he was pushing me up alot of them

[Twisty]

[quote author=BundyMonkey link=board=18;threadid=11927;start=0#msg209467 date=1126237296]
as Dave know from on the way down to Tuff truck I sure he was pushing me up alot of them
[/quote]

LOL, I was just going to mention something about that :-X ;D

[Bundy]

[quote author=Twisty link=board=18;threadid=11927;start=0#msg209469 date=1126237527]
[quote author=BundyMonkey link=board=18;threadid=11927;start=0#msg209467 date=1126237296]
as Dave know from on the way down to Tuff truck I sure he was pushing me up alot of them
[/quote]

LOL, I was just going to mention something about that :-X ;D
[/quote]

But atleast my bearings didnt sh!t themselves :-X

[Bundy]

Well after driving it to work for a week was almost home on Thursday when I heard a slight knock coming from the enguine so I called into my mechanic and I have since found out that it broke a gugeon pin (holds the piston to the conrod) So she is being repaired again but getting some extra work while its all apart. So might get a few more horses out of it yet

[Twisty]

SH!T thats no good Andrew......is that being fixed under warranty? as they would have that out while doing the crank wouldn't have they?

Will it still be right for the Forum Meetup?

[Bundy]

No its just old age. But Cause I know the guy he is going to do all the labour and I just have to pay for parts and put a sticker on the car for him. So it will work out much cheaper.

Sure will hopefully have it back next week but will be 2 weeks at the worst

[Bundy]

Well on my way home last night i called into the mechanic and they now have the head off it and are moving pretty quickly so should have it back on time.

They had let the front wheels down to make it easier to work on cause it was too high and a pain ;D

nice looking Bundy 8)

shame about the engine :-X

[DIRTY]

Nice bundy, looks like you could fit bigger tyres ;D

[Bundy]

Thanks,

If I put any bigger ones on they will only scrub on the inside in the rear even more

[Twisty]

I remembered I had a pic of Andrew and my trucks together at Tuff Truck, so thought I'd post it up.



Dont those 31's look great!! ;D :-X :P

[Bundy]

Thats why im flogging those 31s to death when I can actually drive the thing so I can get bigger ones

[cpt-mud]

looks good, nice unit